Kenmore PRO 401.40483800 Use & Care Manual page 8

Gauge_
Display
Freezer
Temp. Rapid ice Cubed Crushed
Water
Fridge
Filter Light Lock Temp.
(Hold 3 sec)
Gauge
Display
HOW TO SET THE FREEZER
TEMPERATURE
Press and hold the Freezer Temp pad on the control
panel until the desired set temperature is in the display.
The digital display will show the set temperature for 5
seconds, and will then show the actual temperature. The
large analog gauge always shows the actual temperature.
If the set temperature varies from the actual temperature,
the freezer will automatically adjust the actual temperature
to match the set temperature.
Freezer temperatures can be set between -14°F
(-25.5°C) and 8°F (-13°C), at increments of 2°F. The
factory default (and recommended) setting is 0°F (-18°C).
Allow time after each adjustment for the freezer to reach
the temperature you set.
HOW TO SET THE REFRIGERATOR
TEMPERATURE
Press and hold the Fridge Temp pad on the control
panel until the desired set temperature is in the display.
The digital display will show the set temperature for 5
seconds, and will then show the actual temperature. The
large analog gauge always shows the actual temperature.
If the set temperature varies from the actual temperature,
the refrigerator will automatically adjust the actual
temperature to match the set temperature.
Refrigerator temperatures can be set between 34°F
(1°C) and 46°F (8°C), at increments of 2°R The factory
default (and recommended) setting is 38°F (3°C). Allow
time after each adjustment for the refrigerator to reach
the temperature you set.
NOTES:
Refrigerator and freezer temperatures will change based
on number of door openings, the quantity of stored food,
and the room temperature, and may require more than
one adjustment.
Display temperature would be slightlydifferent from
actual temperature depending on usage and operating
environment.