Table of Contents
Advertisement
PC input signal chart
The following
chart shows the suggested
screen
resolutions.
Troubleshooting
• If "Unsupported Mode" appears on the screen,
adjust the PC display setting to correspond to
one of the settings in the above table.
• If you switch off the TV, interference lines may
occur on the TV screen. This is normal.
Changing
your computer's
video
resolution
The following
example
shows Windows
XP ®
settings.
Even if you use a different
Windows
operating
system,
the basic setup methods
are
similar.
For changing
video resolution
on a
Macintosh
® computer,
refer to your Macintosh
®
documentation.
To change your computer's video resolution:
1 Click Start, Control Panel, then double-click
Display. The Display Properties dialog box
opens.
no color
• Checkthe program's color features
becauseit may be a black and white
movie.
The picture has
Make surethat the antenna is installed correctly.
overlapped
If not, adjust the antenna toward the
images
broadcasting station.
Piotuie has silow ......
.
and its
ii
there are problems, correct them. If all
connections are tight, the problem may
be with a faulty antenna or cable.
° Checkcar traffic or neon signs that may
disrupt the image.
Stripes on picture Checkfor interference from other electronic
devices,such as radios and televisions, and
keep magnetic or electronic devices away from
your TV.
Badstereo or
A long broadcast distance, or interferencefrom
SAP sound
radio waves, can cause bad sound reception. If
so, changethe mode to Mono.
Remote control
Remove obstacles betweenthe remote control
does not work
and the player. Point the remote control at your
TV's IR sensor. Install new batteries.
"Unsupported
Checkthe resolution and frequency of your
Mode" appears
computer, and adjust it to the optimum
on the screen
resolution for this TV: 1360x768 at 60Hz.
"No Sync"
Make sure that the cable is firmly connected to
appears on the
the computer and TV.
screen
Image is not
Adjust the horizontal control.
centered
Picture has a few A few bright or dark dots on an LCD screen is
bright or dark
normal. It does not affect the operation of this
dots
TV.
2 Click the Settings
tab.
3 Change the screen resolution setting to a
supported resolution (the ideal resolution for
your TV is 1360 x 768).
4 Click OK, then click Yes to save your
changes.
25
Advertisement
Table of Contents
