Prodew FogMist Block Installation Manual page 31

Start-up Procedures
1
Plug in the timer 110V and the transformer
male port into the outlet.
3
Confirm that the
water supply has
pressure and volume,
and that everything
is plugged in and
connected.
2
The transformer light should turn green, indicating
that the transformer is getting power.
4
Turn on the water valve and check
the inlet pressure by looking at the
solenoid box gauge.
It should be 30PSI.
If it is not 30PSI, continue to step 5.
If it is 30PSI, skip to step 6.
31