Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Prodew Manuals
  4. Commercial Food Equipment
  5. FogMist Block
  6. Installation manual

Prodew FogMist Block Installation Manual

Hide thumbs

Advertisement

Available languages

Available languages

Quick Links

Download this manual
FogMist™ Block
Installation Manual

Advertisement

loading

Related Manuals for Prodew FogMist Block

Summary of Contents for Prodew FogMist Block

  • Page 1 FogMist™ Block Installation Manual...
  • Page 3 Timer Settings Ajustes del Temporizador System Warranty Garantía del Sistema Having trouble understanding our instructions? Tiene dificultad para entender nuestras instrucciones?? Contact our customer service Contacte nuestro departamento de department with your questions. servicio al cliente con sus preguntas. sales@prodew.com sales@prodew.com...
  • Page 4 Contenido del paquete Compresor de Aire Temporizador Caja de Solenoide Bloque FogMist™ COM001-FOG (HTIM001-110-S38) (FMSOLBX-PRM38) (HFMSPR005Q53-P) or HCOM001-1HD) Kit de Aire para Nozzles Filtro de Fosfato (5mic) Water Inlet and Drain Kit Water Kit for Nozzles (part of FMNOZ-2SS53) (2FIL-EC-S10-2038-P) (part of FMNOZ-2SS53) (part of FMNOZ-2SS53) Tornillos...
  • Page 5 Requerimientos para Instalación IMPORTANTE Estos requerimientos deben estar disponibles para comenzar la instalacion. Suministro de Agua Enchufe Electrico de 4 Drenaje • Adaptador de valvula • 110/220VAC • Minimo de 3/4’’ de tubo de bala 1/2’’ 60/50Hz de desague 20Amp • Presión minima de 30 • Facilmente accesible • Facilmente accesible...
  • Page 6 Diseño del Sistema 2TUB14O-14I-BK Tub, 1/4 inch OD Poly PART NUMBER DESCRIPTION QUANTITY HTIM001-110-CLD Timer Box 110V 2PRTQ53Q14Q53 Reducing Tee, 5/32 inch Q x 1/4 inch Q x 5/32 Q 2TUB53O-18I-B Tub, 5/32 inch OD Poly for Air - Black Air Compressor 2TUB530-18I-W Tub, 5/32 inch OD Poly for Water - White...
  • Page 7 Diseño del Sistema...
  • Page 8 Diagrama de Compresor de Aire HCOM001-2HD-FOG (Sistemas grandes) 2FCVAL-M14 Air Flow Control Valve 1/4 inch NPT PART NUMBER DESCRIPTION QTTY 1COM005-C Air Comp. Single Head 110 VAC 2GAU010 Gauge 1.5 inch, 1/4 NPT, 0-60 2PMCQ38M14 Male Con, 3/8 inch QC x 1/4 inch MPT 1WIR050 Wire, 16/3 Extension Cord 2AFIL-INL14-5MIC...
  • Page 9 Diagrama de Compresor de Aire HCOM001-1HD (Sistema pequeño) 1COM002 Air Compressor, Dbl Hd, 110VAC PART NUMBER DESCRIPTION QTTY 2GAU006 Gauge 1.5 inch 1/4 inch NPT, 0-160 2FCVAL-M14 Air Flow Control Valve 1/4 inch NPT 2PMCQ38M14 M Con, 3/8 inch QC x 1/4 inch MPT 3CLPHUM003 Suction Cup, w/ 8-32 MS Insert 2AFIL-INL14-5MIC...
  • Page 10 Diagrama del Temporizador HTIM001-110-CLD (Relay) PART NUMBER DESCRIPTION QTY.
  • Page 11 Diagramas de Bloques FogMist™ HFMSPR005Q53-P PART NUMBER DESCRIPTION QUANTITY 4SPRB-F53 Air-Side Block 4SPRB-F53 Water-Side Block 4SPRB-F53 Bracket FMSPR-4W6A-BL38 Nozzle with Cap 4HNDPS14 Humidity FM Drip Pan 3FAS0223SS #8 x 3/8in Stainless Steel Pan Head Phillips 2ORN-038 O-Ring, 7/32in x 13/32in EPDM 2PHFCRT-53-01-G 5/32in Half Cartridge 2ORN-037...
  • Page 12 Diagrama de caja de Solenoide FMSOLBX-PRM38 PART NO. DESCRIPTION QTY. 3ENC007 250X200X100 ENCLOSURE 1SOL38-24-NC-FIL-P SOL, 3/8F 2W NC 24V 2PSAS38M38-D 3/8SX3/8MPT STEM ADAPTER 2PSEQ38S38 STEM ELBOW 3/8X3/8 STEM 2TUB14O-18I-W TUB 1/4 OD 2TUB38-14I-W TUB 3/8 OD 2PBHQ38Q38 3/8X3/8 BULKHEAD 2GAU006 PRESSURE GAUGE 1CON018 CORD GRIP...
  • Page 13 NOTA: Sistema es instalado de misma manera en vitrinas de Instalación del sistema gravedad y aire forzado IMPORTANTE Monte la caja de solenoide y CORRA LA LINEA DE AGUA POR compresor de aire abajo la vitrina. 3-4 MINS ANTES DE CONECTAR Asegurar que la caja de control este NUESTRA LINEA DE AGUA.
  • Page 14 Instalación del sistema Conecte el filtro al puerto Conecte el tubo negro restante al Corra la línea de drenaje hacia el etiquetado ‘INLET’ en la caja del puerto etiquetado ‘drenaje’ en la drenaje del piso. Ate el tubo negro a solenoide usando la tuberia negra. caja del solenoide las líneas de drenaje existentes usando cremalleras.
  • Page 15 Instalación del sistema Perfora un agujero de 5/8 pulgadas en la Localiza las dos secciones de dos Corre una sección de tubería bandeja de drenaje en cada lado de la caja en pulgadas de tubo negro. Estas negra de 1/2 pulgada desde el punto más alto en el lado del empleado.
  • Page 16 Instalación del sistema Asegura la línea de drenaje Busque el kit de agua para las Busque el kit de aire para las boquillas y desconecte el tubo boquillas y desconecte el tubo transparente de agua de 5/32 negro de aire de 5/32 pulgadas pulgadas de ambos lados de la te.
  • Page 17 Instalación del sistema Tire las dos líneas de agua 5/32in a la Tire las dos líneas de aire 5/32in Vuelva a conectar ambas líneas caja de solenoide de cada extremo de al compresor de aire de cada transparentes de agua a la toma de la caja.
  • Page 18 Instalación del sistema Encienda el agua principal. Enchufe el temporizador 110V y el Gire el interruptor de palanca transformador. del temporizador a la posición ‘ON’. MIST POWER ON TIME OFF TIME Enjuague las líneas de un ciclo ajustado Una vez finalizado el ciclo, mueva el En uno de los bloques, conecte la a los ajustes máximos.
  • Page 19 Procedimientos de Arranque Enchufe el temporizador 110V y el La luz del transformador debe ponerse verde, transformador. indicando que el transformador está recibiendo energía. Encienda la válvula de agua y Confirme que el compruebe la presión de entrada suministro de agua mirando el calibre de la caja del tiene presión y solenoide.
  • Page 20 Procedimientos de Arranque Si la presión del Ajuste el tiempo de ON TIME (minutes) agua entrante no ‘OFF’ a su mínimo MIST POWER es 30PSI, ajuste la y gire el tiempo presión abriendo la de ‘ON’ a su valor caja del solenoide máximo.
  • Page 21 Procedimientos de Arranque Si la presión del aire no es 15- Deje que el sistema funcione durante 20PSI, ajuste la presión de aire en el varios ciclos hasta que todas las compresor de aire con una llave allen boquillas produzcan niebla. de 5/32in.
  • Page 22 Duración entre ciclos de niebla XX Meses XX Meses 11.5 Teniendo problemas 11.5 entendiendo nuestras XX Meses instrucciones? OFF TIME OFF TIME (minutes) (minutes) Contacte a nuestro departamento de XX Meses servicio al cliente con sus preguntas. XX Meses sales@prodew.com...
  • Page 23 MERCHANTABILITY, EXCEPT AS SPECIFICALLY SET FORTH HEREIN. Except as stated above, Prodew, Inc., its suppliers, and agents will not be liable for any loss, injury, or damages to persons or property resulting from failure of defective operation of any material, equipment, or installation furnished hereunder or delay in performance of this agreement, nor will it be liable for direct, indirect, special, incidental, or consequential damages of any kind sustained from any cause.
  • Page 24 Utility Requirements IMPORTANT These utility requirements must be in place before installation can take place. Water Supply 4-Plug Power Outlet Floor Drain • 1/2in female NPT • 110/220VAC • Minimum 3/4in for adapter with ball valve 60/50Hz waste water or a 1/2in 20Amp drain pipe • Minimum inlet pressure...
  • Page 25 System Installation NOTE: System is installed the same in Gravity and Forced Air Cases IMPORTANT Mount the solenoid box and the air FLUSH THE CITY WATER LINE FOR compressor under the display case. 3-4 MINUTES BEFORE CONNECTING Make sure to place the control box TO OUR WATER LINE.
  • Page 26 System Installation Connect the filter to the port Connect the remaining black tubing Run the drain line towards the floor drain labeled ‘INLET’ on the solenoid box to the port labeled ‘DRAIN’ on the under the case. Strap the black tubing using black tubing. solenoid box. to the existing drain lines using zip-ties. Leave a 1in air gap between the black tubing and the drain to avoid...
  • Page 27 System Installation Drill a 5/8in hole in the drain pan on each Locate the two sections of 1/2in Run one section of 1/2in black side of the case at the highest point on black tubing. These will be used tubing from the blocks to the the employee side.
  • Page 28 System Installation Secure the drain line. Find the water kit for the nozzles and Find the air kit for the nozzles and disconnect the 5/32in clear water disconnect the 5/32in black air tubing from both sides of the tee. tubing from both sides of the tee. Run one section of the 5/32in clear Strap each 1/2in black tubing line in Fill all voids around the 1/2in black...
  • Page 29 System Installation Pull the two 5/32in water lines together Pull the two 5/32in air lines Reconnect both 5/32in clear at the solenoid box from each end of together at the air compressor water lines to the air tee that the case. from each end of the case.
  • Page 30 System Installation Turn the main water on. Plug in the timer 110V and the Flip the toggle switch on the transformer into the outlet. timer to the ‘ON’ position. MIST POWER ON TIME OFF TIME Flush the lines for one cycle set to the After the cycle ends, flip the toggle On one of the blocks, connect the maximum settings.
  • Page 31 Start-up Procedures The transformer light should turn green, indicating Plug in the timer 110V and the transformer male port into the outlet. that the transformer is getting power. Turn on the water valve and check Confirm that the the inlet pressure by looking at the water supply has solenoid box gauge.
  • Page 32 Start-up Procedures If the incoming water Set the OFF time to ON TIME (minutes) pressure is not 30PSI, its minimum and turn MIST POWER adjust the pressure by the ON time to its opening the solenoid maximum setting. box and rotating the black knob by hand or screw driver while the system is running.
  • Page 33 Start-up Procedures If the air pressure is not 15-20PSI, Let the system run for several cycles adjust the air pressure on the air until all the nozzles produce fog. compressor with a 5/32in allen wrench. Set the timer to the recommended settings. See page 20 for settings.
  • Page 34 • OFF Time - 10 minutes XX Months Duration in between fog cycles. XX Months XX Months 11.5 11.5 Having trouble understanding our instructions? XX Months OFF TIME OFF TIME (minutes) (minutes) Contact our customer service XX Months department with your questions. XX Months sales@prodew.com...
  • Page 35 MERCHANTABILITY, EXCEPT AS SPECIFICALLY SET FORTH HEREIN. Except as stated above, Prodew, Inc., its suppliers, and agents will not be liable for any loss, injury, or damages to persons or property resulting from failure of defective operation of any material, equipment, or installation furnished hereunder or delay in performance of this agreement, nor will it be liable for direct, indirect, special, incidental, or consequential damages of any kind sustained from any cause.