Samsung HJ690W Series Install Manual page 33

Hotel Option menu Item
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto Initialize
Network Setup
Apps ID Setting
Network
Apps Setting
Service Discovery
LAN OUT
VLAN ID
Solution VLAN ID
Device LAN ID
ARP Interval
BLE
(only for HG32EJ690F)
Description
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, the TV menu items are restored again to their
values cloned initially when the TV turns off and then on.
If this item is entered into, Network menu is displayed. The Network menu is used for
setting network like internet access.
• Network Status: View the current network and Internet status.
• Soft AP: Turns on or off the Soft AP. When Soft AP is set to on, your mobile devices
can find the TV name in Wi-Fi connection list.
– When the TV connected with wireless network, Soft AP is enabled.
• Security key: Set a security key that you need to enter on other devices so they can
connect to the TV.
• Open Network Settings: Connect to an available network.
– Input the generated security key into the device you want to connect.
– If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
– Soft AP may not be available if it is not supported by the model.
– Maximum number of devices that can be connected: 4 devices.
– Bitrate: > 10 Mbps/device. (The TV does not support network speeds less than or
equal to 10Mbps.)
– The specifications above are based on our in-house testing. Actual performance
may vary depending on your wired/wireless network environment.
The feature to set specific Hotel ID for installing the app of the correspoding hotel in
the Hotel TV.
Enters Samsung App Store for managing current apps and installing new apps in the
Hotel TV.
Can use this feature to enable the function like DLNA.
Enable/disable LAN Out. When enabled, the TV can work as a wired router for other
network devices.
Create separate VLAN (Virtual Local Area Network) groups. A 3-digit number can be
entered between 1 and 255 for the VLAN ID.
When VLAN (Virtual Local Area Network) is used, set a VLAN ID to be assigned to a
Solution (such as SYNC, H.Browser etc.).
Set a VLAN (Virtual Local Area Network) ID to be assigned to external devices
connected to the LAN OUT port.
Adjust the ARP (Address Resolution Protocol) interval value.
• Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 / 600 / 1800 / 3600 second (default:
60 sec)
• Support: TV can search for Samsung mobile devices via Bluetooth Low Energy.
• Not support: TV can not search for Samsung mobile devices via Bluetooth Low
Energy.
English - 33