Table of Contents
Advertisement
Hotel Option menu Item
USB Pop-up Screen
External Source Banner
External
Source
Auto Source
Anynet+ Return Source
Sub Amp Mode
Bathroom
Speaker
Sub Amp Volume
Power Saving Mode
Eco
Solution
Power Saving Mode Timer
Welcome Message
Edit Welcome Message
Hospitality Logo
Logo/
Message
Hospitality Logo DL
Logo Display Time
Description
When USB is connected to the TV :
• Default: A popup window appears.
• Automatic: This enters the USB content menu automatically.
• Disable: Neither the popup window nor the menu appears.
If set to on, the TV displays the External Source Banner (information) when you
change the TV source to another external input, press the SOURCE button on the
remote control, or turn on the TV.
• ON: The External Source Banner (information) is displayed on the TV screen.
• OFF: The External Source Banner (information) is not displayed on the TV screen.
• ON: When an external input source is connected to the TV, the TV identifies the
input source, and then automatically switches to that input source.
• OFF: Auto Source function is disabled.
Select the source to return after stopping an Anynet+ (HDMI-CEC) connection.
• This function is especially useful for the Guestlink RJP.
• Source type: Power On Src, Last Source, TV, HDMI 1, HDMI 2, HDMI 3
Determines the bathroom speaker sound AMP operation mode.
• 0: Turns the bathroom speaker sound AMP function off (PWM off).
• 1: The bathroom speaker sound volume follows the TV speaker sound volume
identically. The bathroom speaker sound volume is controlled by the TV remote
control or TV's panel buttons.
• 2: The bathroom speaker sound volume is controlled by the bathroom speaker
volume controller.
The initial bathroom speaker sound volume after TV is turned on.
Adjusts the brightness of the TV to reduce power consumption.
• OFF: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
This function is only available when set to Hospitality Mode: Interactive, SI Vender:
Magilink.
Displays the welcome message for 60 seconds when the TV turns on.
Edits the welcome message.
Turns the Hospitality Logo function is set to OFF, BMP, AVI, BOTH. If the function is
not set to OFF, the TV is turned on, the logo is displayed, before the signal from the
initial source, for the amount of time set in Logo Display Time.
• The DivX codec is not supported.
You can download the startup logo from the connected USB flash drive.
Hospitality logo file requirements:
• Image or video files only.
• The image file is supported up to 2 MB.
• The video file is supported up to 50 MB.
• File can only be named "samsung_image.*", "samsung_video.*"
Set the time displayed Hospitality Logo. (3/5/7 seconds).
English - 32
Advertisement
Table of Contents
