Samsung HJ690W Series Install Manual page 19

Fhd tv
Table of Contents

Advertisement

HDMI IN 1, 2, 3 (eARC)
Connects to the HDMI jack of a device with an HDMI output.
– No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
– It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet
the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version,
contact to the Samsung customer care centre.
ANT IN (SATELLITE), (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
COMMON INTERFACE
Watches paid channels by inserting your TV viewing card ("CI or CI+ Card") into the COMMON INTERFACE slot.
DATA
Used to support data communication between the TV and the SBB or STB.
RJP
Connect this port to the port on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcorder, PC, DVD players etc.) easily.
VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Volume Control Box on the Bathroom Wall and
the VOL-CTRL port.
VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the VARIABLE AUDIO
OUT port.
LAN IN / LAN OUT
To connect a LAN cable, use a CAT 7 (*STP type) cable for the connection. (100/10 Mbps)
* Shielded Twisted Pair
English - 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg32ej690fHg32ej690wHg32ej690we

Table of Contents