Clevo ITAUTEC Service Manual page 34

Disassembly
8. Replace the bay cover and screws (make sure you reconnect the fan cable before screwing down the bay
Figure 6
cover).
RAM Module
Note that there are four
Removal (cont'd.)
fit, before screwing down the bay cover.
d. Properly re-insert the
bay cover pins.
9. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
2 - 10 Removing the System Memory (RAM)
- cover pins which need to be aligned with slots in the case, to insure a proper cover
5 8
c.
5
6
7
8