Table of Contents
Advertisement
2
Safety instructions
2 Safety instructions
The installation and commissioning as well as the connection of electrical components require
technical knowledge commensurate with a recognised vocational qualification as a fitter for
plumbing, heating and air conditioning technology, or a profession requiring a comparable level of
knowledge [specialist].
The following must be observed during installation and commissioning:
relevant local and national regulations
●
accident prevention regulations of the professional association
●
instructions and safety instructions mentioned in these instructions
●
Danger of scalding due to the escape of hot fluids!
With pressure relief valves, there is a risk of scalding due to the escape of vapour or
hot fluid.
Please ensure for each pressure relief valve that no personal injury or material
damage may occur due to possibly escaping medium.
►
►
►
Risk of burns!
The valves and fittings and the pumps can become heated up to more than 100 °C
during operation.
►
09/2023
WARNING
Install a discharge line.
Observe the instructions regarding the pressure relief valve.
The pressures for the expansion tank calculated by the plant designer and
the operating pressure of the installation must be set.
The insulating shell must remain closed during operation.
9976x0210x-mub-en - V02
CAUTION
5
Advertisement
Table of Contents
