Automatic Channel Management; Factory Settings - Philips 42PFL9900 Manual

2664.1 eng_aurea_AP
6.4 Automatic channel
management
Once a day, at 3 AM, all available TV channels are
updated automatically. The update is done if your
TV is in standby.
Earlier stored channels not found by the update will
be removed from the channel list.
You can do this update yourself anytime.
‡ Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Installation update.
® Press navigation key right to enter the
Installation update menu.
Ò Press
.
OK
† Press the green key to start.
The update starts and may take a few minutes.
º When the update is completed, press the red
key to return to the Channel installation menu.
◊Press Menu to quit the menu.
6.5

Factory settings

If you are lost in the picture, sound and Ambilight
settings, you can reset the TV to the factory settings
of picture, sound and Ambilight
‡ Press Menu on the remote control and select
TV menu > Installation > Factory settings.
® Press navigation key right to enter the Factory
settings menu.
Ò Press
OK .
† Press Menu to quit the menu.
rNote
The channel installation settings are not changed.
34
27-09-2007 12:32 Pagina 34
Use more of your TV