5.10 Software Update - Philips 42PFL9900 Manual

Hide thumbs Also See for 42PFL9900:
Table of Contents

Advertisement

2664.1 eng_aurea_AP

5.10 Software update

Philips continuously tries to improve its products. It
may be recommended for you to update the TV's
software. To update your TV software you need a
USB Memory device (not supplied).
rNote
The device must have at least 48Mb free space.
Make sure the write protection is turned off.
Some USB devices do not work with our TV.
Contact your dealer.
5.10.1 Update assistant
The Update assistant helps you to update the TV's
software.
TV identification
The TV will identify itself to your USB memory
device.
‡ Press Menu.
® Press navigation key right.
Ò Press navigation key up or down to select
Software update.
† Press navigation key right.
TV menu
Update assistant
Update assistant
TV settings
Features
Current software...
Installation
Local updates
Software update
º Press navigation key up or down to select
Update assistant.
◊Press navigation key right.
‹Press
OK
to activate.
≈Insert a USB memory device to the USB
connector at the side of the TV.
The main menu appears.
Ú Press the green key to proceed.
A message appears the TV has successfully
written the identification file to the USB
memory device.
œ Press the green key again to finish.
π Remove the USB memory device from the TV.
30
27-09-2007
12:32
Pagina 30
5.10.2 Software download from the PC to
the USB device
‡ Insert the USB memory device into a PC linked
to the internet.
® Locate and open the file "update.htm" on your
USB device.
Ò Read the instructions on screen and click on
the Send
ID
button.
The software update is downloaded on the
USB memory device.
† Remove the USB memory device from your
PC.
5.10.3 Transfer of the downloaded software
update to the TV
The downloaded software on the USB memory
device must now be uploaded to your TV.
ç Caution
• Do not remove the USB memory device during
the software update.
• If a power drop occurs during the update, do not
remove the USB memory device from the TV.
The TV will continue the update as soon as the
power comes back.
‡ Insert the USB memory device to the USB
connector at the side of the TV.
U
S
B
® The TV switches off. The screen stays black for
about 10 seconds. Wait and do not use the
power switch B on the TV.
U
S
B
Use more of your TV

Advertisement

Table of Contents
loading

Table of Contents