Advertisement
■To prolong the service life of bed, inspect and perform maintenance at least once a year to check loosened
bolts, and add lubricant to movable parts.
■Avoid exposing bed and mattress to moisture and humidity which will cause rust, abnormal sound and
bacteria. If there is water, please wipe it off immediately.
Caution
●Depending on the environment and condition of bed, deterioration may advance and damage
may occur. If you find any difference during the maintenance, please stop using the bed
immediately and ask your distributor or our company for repair.
Tips
●Do not clean the bed with special cleaners used for beds.
■Bed body
●
When cleaning, wring out the cloth soaked in dilute water and neutral detergent solution to clean, and
then wring out the cloth soaked in water to wipe out the residual detergent. Finally, please dry it with a
dry cloth again.
＊Do not use volatile substance (thinner, volatile agent, gasoline), which may cause corrosion and
discoloration.
When using disinfectants, be sure to follow the specified concentration of disinfectant and use after dilution.
●Depending on the disinfectant, corrosion of metal parts, discoloration, deformation, and cracking
of resin parts may occur. Please use the disinfectant recommended above.
●Please confirm the ingredients in the disinfectant solution instructions before use.
Tips
●After disinfection, wipe off disinfectant solution.
●After cleaning with methyl phenol, it may cause discoloration and deterioration of the decorative
board of the head and foot panel.
●Not suitable for use of ozone sterilizer or autoclave sterilizer.
■Accessories
Lying surface extension
●Please maintain it the same as the bed body.
■Mattress and mattress for lying surface extension
●● Depending on the use condition and sweat produced, please dry the mattress in a ventilated and
cool place every 2 to 4 weeks to remove moisture from the inside for more comfortable use (If the
mattress has an instruction manual, please use it according to the manual.)
●When cleaning and maintaining bed, please pay attention to the corners and
edges of frame and screw part. There is a risk of injury to hands, etc.
�. ��~�. �％
�. ��~�. �％
�. ��％
Ammonium chloride disinfectant solution
Phenyl chloride disinfectant solution
Bis-chlorobenzene biguanide ethane solution
8
��
Advertisement
