Contents PRODUCT INFORMATION....................... 2 NAME OF PRODUCT COMPONENTS ..................2 III. OPERATING PARAMETERS ....................3 INTENDED USE ......................... 3 CONTRAINDICATIONS AND CLINICAL LIMITATIONS ............ 3 INSTALLATION AND OPERATING INSTRUCTIONS ............3 VII. WIFI SETUP METHODS ......................7 VIII. PRECAUTIONS AND WARNINGS..................10 SAFETY PRECAUTIONS ......................
PRODUCT INFORMATION 1、 Product name: Intelligent Turning Air Mattress 2、 Model: P2312 3、 Dimension: 2000 mm × 900 mm × 150 mm (inflated) 4、 Weight: 15 kg 5、 Route of communication: 2.4 G Wi-Fi 6、 Power supply: AC, 220 V, 50 Hz; input power, 75 W 7、...
(min) angle pressure (min) rotation (min) P2312 20 kPa 10-40, step size: 1 10-120, step size: 1 0°-30°±5° IV. INTENDED USE The product is intended for the prevention and relief of bedsores in bedridden patients.
Page 6
Turn on the power switch to boot the whole unit. Lock/unlock the function buttons by long pressing the "Lock" button. The function buttons will automatically be locked after 30 seconds of inactivity. The LED light will turn on when the buttons are in a locked state. Other Turning Alternating...
Page 7
Press the "Weight" button to enter the Weight Settings interface. Press the "Up" or "Down" arrow buttons to adjust the value. Weight Figure 5 Press the "Alternating Mode" button to enter the Alternating Mode Settings interface. Press the "Up" or "Down" arrow buttons to adjust the alternating cycle duration. Alternating...
Page 8
Figure 6 Press the "Turning Mode" button to enter the Turning Mode Settings interface. Press the button again to switch between Turning Left, Turning Right, Auto-Turning, and No Turning modes. Under the Auto-Turning mode, press the "Up" or "Down" arrow buttons to adjust the turning cycle duration.
Nursing Static Figure 8 The above installation and commissioning steps can be completed by the user in accordance with the IFU. For any questions, please consult us by phone. Quick CPR switch Air supply connector Figure 9. Schematic diagram of quick CPR switch VII.
Page 10
Weight Height Lock/Unlock 2. According to the prompts on the page, select the "Distribution Network" option and click "Start Configuration". 3. Enter the name, password, port number, and IP address (provided by the manufacturer) of the router to be connected, and click "Send". For configuration with a Bewatek server, set the port number to 1883 and the IP address to 121.196.191.130.
Page 11
4. A message of "WiFi setup successful" will pop out. 5. Check the WIFI logo on the control box of the Intelligent Turning Air Mattress.
VIII. PRECAUTIONS AND WARNINGS Prior to using any of the functions of the product, please read the warning signs or labels shown prominently on the device and follow the instructions. Do not exceed the safe working load of the air mattress (135 Kg). The Quick CPR function is only intended for use in the event of cardiopulmonary resuscitation (CPR).
⚫ The air mattress and air pumps should be kept away from fire sources such as cigarettes; ⚫ Do not immerse the air pumps in water or other liquid; ⚫ Do not clean the mattress with carbonic acid or phenolic solutions; ⚫...
XII. STORAGE AND TRANSPORT CONDITIONS Packaged air mattresses can be transported using standard transportation vehicles. During transportation, the product should be handled with care, avoiding throwing, rolling, or applying excessive pressure, and should be protected from the rain. Packaged air mattresses should be stored in a well-ventilated room free from corrosive gases, with an ambient temperature of -20°C -55°C and relative humidity of ≤85%.
XIII. PACKING LIST Table 2. Packing list Name Quantity Intelligent turning air mattress Instructions for use Product certificate Pressure sensor pad Optional Please check the packaged items against the packing list and examine the condition of the Intelligent Turning Air Mattress and its accessories (see Table 3 for the accessory list). Should any damage be detected, please contact the after-sales service team promptly.