Advertisement
5
Caution
■Disassembling parts
Handling fixtures
Cardboard
Plastic film
13
●Bed must be handled by more than 4 people, otherwise back and waist may
be injured.
●When assembling, prevent hand from being pinched by parts.
●When assembling, be careful not to get hurt by the protruding parts of bed.
■Tools for use
Wrench (subtense at 13mm）
Special ratchet
wrench (subtense
at 13mm）
Wrench, operable by 2
Handling fixtures
Nut
Best gripping part
[Removal of handling fixtures]
➀Remove the cardboard on top of the main body
and remove the handling fixtures attached to the
head-end frame (in two places).
Bolt
➁ Remove plastic film, grip bed frames at head
end and foot end, and take bed body out of
packing material.
●Support main frame as illustrated in the
figure on the left.
●Bed body taken out must be placed onto
Tips
cardboard, plastic film, etc. to avoid
being scratched.
Advertisement
