Download Print this page

Bewatec iBed Y02W2 Instruction Manual page 18

Manual medical bed

Advertisement

7
3. Back section up/down, leg section up/down and height adjustment
Waist section
up/down
Warning
Caution
17
Back section
up/down
adjustment
Down
Up
Up
Down
Clamping piece
●Handle must be restored to original position after use. If it is pulled out,
one may collide with or stumble over it and get injured.
●Damage may occur if the handle is not pulled out completely before use.
Please be sure to pull out the handle completely before use.
●Do not step on the handle as it may cause malfunction or injury.
●When operating the handle, please proceed step by step while confirming
the patient's condition.
Height
■Back/leg section up/down and height adjustment
is achieved by operating the handle installed in
foot section; rotate handle rightward for up, and
leftward for down.
Foot end
➀Maintain the position of the inclined part and
slowly pull it towards you until it comes to a
stop.
➁Turn clamping piece to perpendicular position,
grasp the clamping piece and turn the handle .
Tips
●After rotating the handle to its limit,
if continue, you may hear a "click"
sound. This is to prevent damage to
the kit and the medical bed will no
longer move.

Advertisement

loading

Related Products for Bewatec iBed Y02W2

This manual is also suitable for:

Ibed y12w2