Setting The Clock - Sony CFD-E75 Service Manual

The Timer

Setting the clock

— —:— — indication appears in the display
until you set the clock.
MENU DSPL
ALARM Jog dial ENT MEM
Before you set the clock, connect the power
source (see page 24).
1
Press MENU¥ALARM until CLOCK
appears in the display, then press
DSPL¥ENT MEM.
The hour digit flashes.
2
Turn the jog dial to set the current hour.
Then press DSPL¥ENT MEM.
The minute digits flash. Set the minutes
by turning the jog dial until the correct
minute is displayed.
3
Press DSPL¥ENT MEM.
The clock starts from 00 seconds.
Tip
The time display system: 12-hour system
AM 12:00 = midnight
PM 12:00 = noon
19
CFD-E75
7