STEP 3—ROUTE CABLE THROUGH UPRIGHT AND MAIN FRAME ASSEMBLIES CONTINUED
d. Route the upright cable through the top of the upright assembly and around the pulleys.
e. Thread a cable puller through the openings on the lower main frame assembly.
f.
Attach the upright cable to the cable puller. Using the cable puller, route the upright cable through the lower main
frame assembly and around the pulleys.
g. Using an allen wrench and a socket wrench or open end wrench, reattach the upright pulleys using 2 hex screws, 4
fl at washers, and 2 lock nuts.
h. Using an allen wrench, reattach the main frame pulleys using 2 hex screws and 2 lock washers.
6
8
26
7
9
11
10
6
10
11