Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Goldair GFP213
Summary of Contents for Goldair GFP213
- Page 1 Operating Instructions Fibre Panel Heater with Thermostat Model: GFP213...
- Page 2 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 3 General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Page 4 General Care and Safety Guide • The appliance must not be immersed in any liquids. • There are no user serviceable parts installed in the unit. • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
- Page 5 Do not run the power cord behind the heater. This will determine where you mount the heater in relation to where the power socket is located. NOTE: Your Goldair EcoPanel Heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, side walls, ceilings, shelves and soft furnishings.
- Page 6 Wall Mounting & Position Instructions cont. The appliance must not be located immediately below a socket outlet. The panel heater must be mounted on the wall with the power switch in the top right hand position as shown below. THIS WAY UP Note: Do not run power cord behind the heater.
- Page 7 Wall Mounting & Position Instructions cont. NOTE: Your Panel Heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, side walls, ceilings, shelves and soft furnishings. 1. Mark the positions of the four holes to be drilled on the wall. Ensure there is a 300mm clearance on all sides of the heater.
-
Page 8: Operating Your Heater
Operating Your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front and 300mm from the sides of the appliance. -
Page 9: Heater Control
Operating Your Heater Your Panel Heater will provide background warmth. This Panel Heater is designed to take the chill off the room. The surface of this Panel Heater can be painted with good quality paint (acrylic or enamel). Decorating tip: All wall mounted heaters may cause paint to discolour or wallpaper to lift. -
Page 10: Safety Devices
• There are no user serviceable parts. For service or repair, contact an authorised electrical service technician. PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. TECHNICAL SPECIFICATION Model No: GFP213 Supply: 230-240VAC 50Hz Wattage: 400-425W SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair –... -
Page 11: Three Year Warranty
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. - Page 12 New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au...
Need help?
Do you have a question about the GFP213 and is the answer not in the manual?
Questions and answers