Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Goldair GFE320
Summary of Contents for Goldair GFE320
- Page 1 Operating Instructions 1800W Flame Effect Heater Model: GFE320...
- Page 2 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 3 General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Page 4 General Care and Safety Guide • The appliance must not be immersed in any liquids. • There are no user serviceable parts installed in the unit. • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
-
Page 5: Installing Your Heater
Installing Your Heater Before using the heater, The unit must be either wall-mounted or fitted to its’ stand. First, Unpack the appliance and remove all the packaging. Check that the appliance shows no signs of damage. The appliance must not be located immediately below a socket outlet. WALL MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON HEAT RESISTANT WALLS THAT COMPLY WITH CURRENT AS/NZS SPECIFICATIONS &... - Page 6 Installing Your Heater WALL MOUNTING CONTINUED Bracket shown above, located in position. • Carefully lift the heater up ensuring that the top rear ledge of heater engages with the wall bracket and is sitting centrally. This process should be carried out by two people to avoid injury or damage to property or the appliance.
- Page 7 Installing Your Heater FIREPLACE STAND It is possible to install the electric fireplace on a stand, instead of mounting it on the wall. Remove the tempered glass panel from the metal body and place the heater face up on a suitable surface. This side goes to front of heater •...
-
Page 8: Operating Your Heater
Operating Your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance. -
Page 9: Mains Switch
Operating Your Heater MAINS SWITCH The control switch positions are: On/Off switch + dimmer switch 900W Low Heat Mode 1800W High Heat Mode Press the O/I button once to turn on the appliance and flame effect. A red indicator light will show to indicate that the flame effect is ON. -
Page 10: Technical Specification
Model No: GFE320 Supply: 220-240VAC 50Hz Wattage: 1800W SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm Phone +64 (0)9 917 4000 Phone +61 (0)3 9365 5100 Phone 0800 232 633 Phone 1300 465 324 info@cdb.co.nz... -
Page 11: Two Year Warranty
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. - Page 12 New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au...
Need help?
Do you have a question about the GFE320 and is the answer not in the manual?
Questions and answers