Goldair GFE340 Operating Instructions Manual

Goldair GFE340 Operating Instructions Manual

2000w flame effect heater

Advertisement

Quick Links

Operating Instructions
2000W Flame Effect Heater
Model: GFE340

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GFE340 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Goldair GFE340

  • Page 1 Operating Instructions 2000W Flame Effect Heater Model: GFE340...
  • Page 3 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
  • Page 4 General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
  • Page 5: Installing Your Heater

    General Care and Safety Guide • The appliance must not be immersed in any liquids. • There are no user serviceable parts installed in the unit. • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
  • Page 6 Installing Your Heater The appliance must have at least 1m clearance above and 200mm to the sides of the heater. The heater must not be enclosed or recessed into the wall. The wall bracket must be fitted horizontally and the cable routed to the bottom right of the heater.
  • Page 7 Installing Your Heater Attach the lower fixing bracket to the base of the heater using the two small black screws supplied. Bracket shown above, located in position. • Carefully lift the heater up ensuring that the top rear ledge of heater engages with the wall bracket and is sitting centrally.
  • Page 8: Operating Your Heater

    Operating Your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front and top of the appliance and 200mm from the sides of the appliance.
  • Page 9: Mains Switch

    Operating Your Heater MAINS SWITCH The control switch positions are: On/Off switch + dimmer switch 1000W Low Heat Mode 2000W High Heat Mode Press the O/I button once to turn on the appliance and flame effect. A red indicator light will show to indicate that the flame effect is ON.
  • Page 10 • There are no user serviceable parts. For service or repair, contact an authorised electrical service technician PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm Phone +64 (0)9 917 4000...
  • Page 11: Two Year Warranty

    In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
  • Page 12 New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au...

Table of Contents