Troubleshooting - Sony CFD-606 Operating Instructions Manual

"y
24
SS LE PE PE TR I IIS EET EEE aT yy
Troubleshooting
Symptom Remedy
The power does not come on. Connect the AC power cord securely.
Make sure the batteries are inserted correcty.
You ¢an't turn on the player using the remote
when you operate the player on batteries.
Make sure the display window is displaving the
function vou want to operate.
Adjust the volume.
Unplug the headphones when listening through
speakers.
Replace all the batteries with new ones if they
are weak.
Move the player away from the TV.
If you are using the remote while listening to
AM radio, noise may be heard. This is
unavoidable.
The picture of your TV becomes
"no disc" lights in the display even
The CD does not play and "Error"
The tape does not move when you
function/The tape does not play.
e
—
@ : :
- There is no audio.
.U]
The audio is weak or has poor
quality.
2
me]
6
[o<
unstable.
when a CD is in place.
lights in the display.
—
@
>
ai
a
a
uv The sound drops out.
press an operation button.
ee
2 The REC @ button does not
©
a
v
Qa
©
bk
The tape does not erase completely.
Additional Information
If vou are listening to an FM program near the
TV with an indoor antenna, move the plaver
away from the TV.
Insert the CD with the label surface up.
Make sure that the disc tray is closed.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the disc trav open for
about an hour to dry moisture condensation.
Make sure "CD" appears in the displav.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged
Place the player in a location free from
vibration.
Close the cassette compartment securely.
Make sure the safety tab on the cassette is in
place.
Make sure that "TAPE" appears in the display.
Clean the erasing heads (see page 26.)
Replace all the batteries with new ones if they
are weak.