Table of Contents
Advertisement
PREPARATIONS
1. Make the necessary connections. (See page 12.)
2. Turn the power of the video monitor on.
6. Set the TIMER switch to OFF.
7. Set the PROGRAMMED OPERATION switch to OFF.
OPERATION
Turn the power on, and insert a recorded video cassette.
:
1. USually set the AUDIO MONITOR switch to MIX.
:
(If you want to hear only the sound on the audio channel 1, set the switch to
CH-1; if you want to hear only the sound on the audio channel 2, set it to
GH-2.)
eThis switch has no effect on the sound output from the LINE OUT jacks.
2. Press the PLAY button. Playback will begin.
To stop playback, press the STOP button.
The long pause mode
can be quickly located.
~~
for 5-times norma! speed
playback in the reverse
for 5-times normal speed playback
in the forward direction
direction
TO PLAY A TAPE BACK
Connect a sync signal or a composite video signal whose color system is the
WITH
AN
EXTERNAL
same as that of the playback tape, PAL, SECAM or NTSC443,
to the SYNC IN co-
SYNC SYSTEM
nnector. In other cases, the VP-5030 operates with an internal sync system.
13
Advertisement
Table of Contents
