Table of Contents
Advertisement
© AUDIO MONITOR jack (mini type)
Connect to the audio input jack on the
video monitor. The signal selected by
the AUDIO
MONITOR
switch on the
front panel is output here.
AUDIO MONITOR
OUT
to audio input
RK-69A
Video monitor
© LINE OUT (audio line output) jacks (phono type)
The
signals
recorded
on
the audio
channel 1 and audio channel 2 are out-
put here.
@ AC IN connector
Connect the supplied ac power cord
here.
@ mm ground terminal
To reduce hum in the audio signal, con- —
nect this terminal to a ground terminal
of the connected audio equipment.
© REMOTE connector (33-pin)
—
Connect an optional auto search con-
trol unit or remote contro! unit to this
connector.
:
eBefore
connecting
the remote
con-
trol cable, check whether the connec-.
tor is male or female.
@The REMOTE
connector
accepts a
20-pin connector. A plug adaptor is un-
necessary.
eWhen a unit which is equipped with a
20-pin connector is connected to the
REMOTE
connector,
do not use the
REV button on the unit. lf you do, the
player will malfunction.
40
OUT CH-t/L
LINE
to a ground terminal
Stereo amplifier, etc.
hr
ground wire
Sf
the triangles to each other.
a fp (33- pin)
aaa
Remote Control
Unit
swhite button
_-RX-353 or RX-303
(20-pin)
Auto Search Control
To disconnect the
cable, press the
white button on
the connector and
pull the connector
out.
Advertisement
Table of Contents
