Operation; Repairs - Conrad Electronic 2832827 Operating Instructions Manual

7.9 Operation

■
A damaged transmitter can make the use of the controller unsafe. Avoid high impacts and rough handling of the
transmitter.
■
Lightning and other strong electromagnetic interferences can affect the safe operation of the controller. Do not
operate the controller during lightning or in the presence of other strong electromagnetic interference.
■
To reduce the risk of accidents, disable the controller and transmitter after use. Switch off and secure the power
supply to the receiver. Disable the transmitter. Store the transmitter in a secure location to prevent unauthorised
access.
■
Indicator lights on the transmitter indicate the operational statuses of the controller to ensure safe operation.
Learn the meanings of the indicator lights as described in these instructions. Take the necessary steps in re-
sponse to indications as described in these instructions.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental
use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.

7.10 Repairs

■
Unauthorised repairs can cause accidents, serious injury or death. Repairs must only be performed by a profes-
sional with the necessary knowledge.
■
Life-threatening voltages can be present if the receiver is open. There is a risk of life-threatening electric shock.
Shut off the voltage supply during repairs.
22