Introduction; Intended Use; Delivery Contents; Up-To-Date Operating Instructions - Conrad Electronic 2832827 Operating Instructions Manual

1 Introduction

Dear customer,
Thank you for purchasing this product.
If there are any technical questions, please contact:
www.conrad.com/contact

2 Intended use

The product is a wireless remote controller set for industrial applications. Use the product to control industrial ma-
chinery and equipment such as cranes and conveyors.
The product has an IP65 ingress protection rating and is protected from dust and low pressure water jets from any
direction. The product is suitable for outdoor use. Do not submerge the product in water.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties
only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

3 Delivery contents

■
Receiver
■
Transmitter
■
Transmitter dust cover
■
4x Rubber dampers (bolt to bolt) (No. 2832827 / 2832829)
■
4x Mounting screws (No. 2832830 / 2832831)
■
Button stickers
■
Operating instructions

4 Up-to-date operating instructions

Download the latest operating instructions at
code shown. Follow the instructions on the website.
www.conrad.com/downloads or scan the QR
19