Changing The Start Time And Cutting Time - Texas A/S RMX 600 User Manual

12. Changing the start time and cutting time

TIP
Setting start times and cutting time is easier to do via the App, rather than via the display
on the robot. See section 17 "Use of App".
The robot is set to start at 09:00 am by default. This start time can be changed by pressing
and at the same time for 3 seconds. After this, a new start time can be set by
using or and
When a new start time is saved, the display will show
heard. In the example below, a new start time is set to 13:25 pm.
The default cutting time is 6 hours per day. Cutting time can be changed to between 1-24
hours. This is done by pressing
be set by pressing
new cutting time is set and saved, the display will show
heard. In the example below, new cutting time is set to 6 hours (06H).
In general: When display shows "IDLE", it means that the robot is ready, and everything is
OK.
to confirm each number until the new start time is set.
for 3 seconds. After this, a new cutting time can
or and to confirm new cutting time (hour number). When
and a beep sound will be
and a beep sound will be
67