Related Manuals for SLS Lab Pro
Summary of Contents for SLS Lab Pro
- Page 1 Operating Manual United Kingdom: Northern Ireland: slsinfo scientific-labs.com NI.sales scientific-labs.com International: Republic of Ireland: slsexport scientific-labs.com ROI.sales scientific-labs.com...
-
Page 2: Table Of Contents
Warranty ..........................13 Troubleshooting ........................ 14 Compliance with the Control of Noise at Work regulations .......... 15 SLS Lab Pro baths are manufactured in the United Kingdom and conform to exacting international standards. SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 3: Safety Instructions
A risk assessment should be conducted – see BS EN ISO 13732-1:2008 for full details WEEE Compliance SLS are complying with the WEEE regulations by contracting-out our obligations to a Producer Compliance scheme. Once it is deemed that this model is no longer effective, please contact us to arrange collection by our compliance scheme provider, who will pick up the machine from your premises. - Page 4 The user should familiarise themselves with this Operator Instruction manual before operating the equipment and should apply to SLS for advice on cleaning techniques and detergents. SLS will not be responsible for damage or injury caused by incorrect use of the equipment.
-
Page 5: Installation - Sls2004, Sls2016 & Sls2018
1 x Operator Instruction manual How to install Connect the mains lead into a suitable mains socket. Fill the bath with water and the correct dose of detergent. The bath is now ready to use. SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 6: Installation - Sls2020, Sls2022 & Sls2026
Connect one end of the drain hose to the hose connector and locate the other end over a drain or sink. Fill the bath with water and the correct dose of detergent. The bath is now ready to use. SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 7: Quick Guide
– the more soiled your items, the more often you will need to change the liquid. SLS recommends changing the cleaning liquid at least on a daily basis. SLS Lab Pro Analogue Ultrasonic Bath... -
Page 8: Manual I Control Panel Instructions (Sls2004 & Sls2016)
SONICS light will go out, and the ultrasonic activity in the liquid will stop. To stop the ultrasonic activity at any time, press the SONICS button while in operation. SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 9: Manual Ii Control Panel Instructions (Sl2006)
To turn off the heater at any time, press the HEAT button while in operation. NOTE: Ultrasonic activity will raise the liquid temperature by 5°C per hour. If in doubt, check actual temperature with a thermometer. SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 10: Manual Iii Control Panel Instructions (Sls2018, Sls2020, Sls2022 & Sls2026)
The temperature dial only controls the heater cut-out temperature. If in doubt, check the actual temperature with a thermometer. SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 11: Technical Information
The time needed to degas the liquid varies depending on the amount of gas present in the liquid and the quantity of water in the tank. SLS recommends a degas period of at least 10 minutes. -
Page 12: Ultrasonic Cleaning Detergents
SLS offer a range of specially formulated ultrasonic detergents for use in applications including medical and heavier industrial cleaning requirements. -
Page 13: Maintenance
This policy is designed to protect the health and safety of employees reducing the risk of potential injury or infection If you require further information please contact the After Sales Dept. on: Tel: +44 (0)1159 821111 or E-mail: slsaftersales@scientific-labs.com SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... -
Page 14: Warranty
Warranty The warranty on this SLS Lab Pro ultrasonic bath applies to defects appearing within 36 months of the date of sale because of faulty material or manufacture. Genuine defective items returned will be replaced or repaired free of charge at their discretion. -
Page 15: Troubleshooting
Troubleshooting SLS have a dedicated After Sales team who are able to resolve any problems that occur with your bath. However, on many occasions it is possible that the problem can be rectified by the operator. The unit fails to turn on and... -
Page 16: Compliance With The Control Of Noise At Work Regulations
'Noise at Work'(INDG362 (rev 1) and in HSE's priced book 'Controlling Noise at Work' (L108) (ISBN 0 7176 6164 4) available from HSE Books or from bookshops. http://www.hse.gov.uk/noise/regulations.htm http://www.opsi.gov.uk/si/si2005/20051643.htm http://www.opsi.gov..uk/si/si1989/Uksi_19891790_en_1.htm http://www.hse/gov/uk/pubns/indg362.pdf http://www.hsebookds.co.uk SLS Lab Pro Analogue Ultrasonic Bath C60 569 01... - Page 17 Republic of Ireland Tel: +353(0) 1 4069464 ROI.sales@scientific-labs.com www.scientificlabs.ie International Tel: +44(0) 115 977 5060 slsexport@scientific-labs.com www.scientificlabs.com United Kingdom: Northern Ireland: slsinfo scientific-labs.com NI.sales scientific-labs.com SLS Lab Pro Analogue Ultrasonic Bath C60 569 01 International: Republic of Ireland: slsexport scientific-labs.com ROI.sales scientific-labs.com...
Need help?
Do you have a question about the Lab Pro and is the answer not in the manual?
Questions and answers