Omron BP9300T Instruction Manual page 23

4.2 Taking a Measurement
Refer to sub-section 3.1 to start a measurement. Follow the provider's instructions.
Note
• Make sure that your monitor is within 16 ft. (5m) of the receiver.
 Transferring Data
• When Bluetooth is enabled, the readings will be transferred to the receiver after
taking a measurement.
4.3 Disabling/Enabling Bluetooth
Warning
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use this
product in locations where RF is restricted, such as on an aircraft or in hospitals.
Turn off the Bluetooth feature in this monitor and remove batteries when in RF
restricted areas. For further information on potential restrictions refer to
documentation on the Bluetooth usage by the FCC/ISED.
1.
When your monitor is off, press and hold the
for more than 10 seconds.
"oFF" flashes 3 times.
23
button