Gree GWH09QB-K6DNA1E Service Manual page 72

Service Manual
Sleep 3- the sleep curve setting under Sleep mode by DIY:
(1) Under Sleep 3 mode, press "Turbo" button for a long time, remote control enters into user individuation sleep setting status, at this time,
the time of remote control will display "1hour ", the setting temperature "88" will display the corresponding temperature of last setting sleep
(3) At this time, 1hour will be automatically increased at the timer postion on the remote control, (that are "2hours" or "3hours" or "8hours "),
the place of setting temperature "88" will display the corresponding temperature of last setting sleep curve and blink;
control will resume the original timer display;temperature display will resume to original setting temperature.
Sleep3- the sleep curve setting under Sleep mode by DIY could be inquired:
The user could accord to sleep curve setting method to inquire the presetting sleep curve, enter into user individuation sleep setting status,
Note: In the above presetting or enquiry procedure, if continuously within10s, there is no button pressed, the sleep curve setting status will
be automatically quit and resume to display the original displaying. In the presetting or enquiry procedure, press "ON/OFF" button, "Mode"
button, "Timer" button or "Sleep" button, the sleep curve setting or enquiry status will quit similarly.
17. About AUTO RUN
When AUTO RUN mode is selected, the unit will be in accordance with the room temp. automatically to select the
suitable running method and to make ambient comfortable.
18. About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so
the preset temp. as soon as possible.
19. About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked,
the icon will be displayed on it, in which case, press any button, the mark will flicker for three times.
If the keyboard is unlocked, the mark will disappear.
20. About swing up and down
1. Press swing up and down button continuously more than 2s, the m ain unit will swing backand forth from up to down ,
and then loosen the button, the unit will stop swing and present position of guide louver will be kept immediately.
2. Under swing up and down mode, when the status is switched from off to
switch to off status directly; If press this button
sequence stated above.
21. About swing left and right(This function is only available for some models)
(1)Press swing left and right button continuously more than 2s,the main unit will swing back and forth from left to right, and then loosen the
button, the unit will stop swinging and present position of guide louver will be kept immediately.
(2)2. Under swing left and right mode, when the status is switched from off to
off status directly; if press this button again within 2s,the change of swing status will also depend on the circulation sequence stated above.
22. About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch °C and °F.
23. Combination of " TEMP" and "CLOCK" buttons : About Energy-saving Function
Press "TEMP" and "CLOCK" simultaneously in COOL mode to start energy-saving function.Nixie tube on the remote controller displays "SE".
Repeat the operation to quit the function.
24. Combination of " TEMP" and "CLOCK" buttons : About 8°C(46°F) Heating Function(This function is only available for some models)
Press "TEMP" and "CLOCK" simultaneously in HEAT mode to start 8°C(46°F)Heating Function.Nixie tube on the remote controller displays"
"and a selected temperature of "8°C" (46°F if Fahrenheit is adopted). Repeat the operation to quit the function.
25. About Quiet function
When quiet function is selected:
(1)Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or when indoor ambient temperature≤28°C(82°F), indoor fan
will operate at notch 2 speed or quiet mode according to the comparison between indoor ambinet temperature and set temperature.
(2)Under heating mode: indoor fan operates at notch 3 speed or quiet mode according to the comparison between indoor ambient
temperature and set temperature.
(3)Under dry, fan mode: indoor fan operates at quiet mode.
(4)Under auto mode: the indoor fan operates at the auto quiet mode according to actual cooling, heating or fan mode.
26. About Sleep function
Under the Fan and Auto mode, the Sleep function cannot be set up, under Dehumidify mode, only Sleep 1 can be selected.Select and
enter into any kind of Sleep mode, the Quiet function will be attached and stared, different Quiet status could be optional and turned off.
Technical Information
again within 2s, the change of swing status will also depend on the circulation
, if press this button again 2s later,
that the ambient temp. approachs
, if press
this button again 2s later, status will
status will switch to
69