Table of Contents
Advertisement
Check that the replacement LED module match the desired colour configuration. ATTENTION:
Check the position references of the LED module before definitively fasten and connect the
module.
Do not use solvent or diluent products.
Remove any condensation accumulated during operations: if necessary, dry thoroughly the
internal sides of the device.
If necessary, replace the gasket.
Reassemble the unit (see the related paragraph in the chapter "ADJUSTMENTS AND MAINTENANCE").
UT-MT-0972_1.0_19-09-2022 (EN)
Use and Maintenance Manual
LED PAPI 66
29
Advertisement
Table of Contents
