Teac Tascam Series Instruction Manual page 16

RECOMMENDED 8 TRACK SETUP
WITH 2 ECHO SYSTEMS
The monitor System can now be divided into 2
separate groups and a different function assigned to each.
Monitor A will perform Contrai Room functions
and Buss/Tape comparisons. Aux 3 will now allow Play-
back Cueing for Overdubs.
Monitor B will give you 4 Stereo Echo Mix that is
separately controllable at all times, and may be recorded
along with the Dry Signal if desired. (Re-ptug Echo RCV
to the buss you wish to use). For clarity, it is shown
connected only to Buss 5 and 6, with Jumpers to 3 and
4, Aux 4 will provide a Mono Echo Mix to be used in
the Earphones so musicians may hear a more musically
pleasing sound. Route the Aux 4 mix to the Aux B
Master by depressing the appropriate push switch on the
Aux B Master Module. The Aux B Master will now act
as a Master Mono Echo Send when the individual Aux 4
"w" pots are rotated rightwards to receive signal only
from the Aux 4 section. Echo will also be possible from
the input modules of the M-15 if the Aux B Mix Control
is used as described on' Page 10. The Mono Return is
added to the Cue Buss with Echo RCV #1 Pot, Switch
"Aux A.
Since each Buss Master Line Out is double, you may
attach a 2 track to the spare jack, We show Buss § and 6
connected, since their meters are more or less centrally
located on the Meter Bridge, but any two will serve. If
you work closer to them when mixing, use 1 and 2, or 7
and 8. Suit yourself.
To stereaecho _
Connect as needed Playback from 8 track
Mono echo. Buss cue system To cue amp 8765 432 tor setup
Power
TEST TONE
© ©
'raLgeack
®@
2 track 68752431)! Stereo echo return
playback To 8 track inputs for mixdown
Cantro! room To 2 track stereo
power amp mixdown recorder
BUSS iN
Mono echo return
(any input, return to cue}
a
©
bout
Cea tnitline et