9, Specifications - Teac Tascam Series Instruction Manual

9. SPECIFICATIONS
INPUT/OUTPUT
CHANNELS
INPUT SELECTOR
£16 IN (24 1N}/8 OUT
:Chan.1~16 MIC/LINE/TAPE
Chan.1~24 MIC/LINE/OFF
MIC INPUT
Mic impedance : 200 ohms
(Matched for 6000hms or less}
Nominal input level :-50dB (3 mV}
Minimum input tevel
Maximum input tevel
1-70 dB (0.3mV}
:420dB (10V}
LINE INPUT
Line input impedance : Greater than. 50k ohms
Nominal input level :-10dB (0.3V)
Minimum input level :-45 dB (5.6mV)
Maximum input level :+28dB (25V)
LINE OUT/AUX OUTPUT
Load impedance : Greater than 10k ohms.
Nominal output level :-2.2 dB/-10 dB, switchable
Maximum output level :+18 dB (8V)
CR MON OUTPUT
Load impedance
Nominal output level!
Maximum output level
: Greater than 10k ohms
:-2.2 dB (0.775V)
:+18 dB (8V)
STUDIO MON OUTPUT
Load impedance
Nominal output level
Maximum output level
Greater than 10k ohms
:+2.2 dB (0.775V}
:+18 dB (8V)
AUX A and AUX B OUTPUTS
Load impedance : Greater than 10k ohms
Nominal output level :-10 dB (0.3V)
Maximum output level +18 dB (8V)
MON A and MON B OUTPUTS
Load impedance Greater than 10k ohms
Nominal output level :-10 dB (0.3V}
Maximum output level :+18 dB (8V)
AUX 3 and AUX 4 OUTPUTS
Load impedance : Greater than 10k ohms
Nominal output level :-10 dB (0.3V)
Maximum output level :+18 dB (8V)
ECHO RECEIVE
Input impedance : Greater than .20k ohms
Nominal input level :-10 dB (0.3V)
Maximum input level :+18dB (8V}
TAPE INPUT
Input impedance : Greater than 40k ohms
Nominal input level :-10dB (0.3V)
Maximum input level :+18dB {(8V)
TAPE FOLDBACK
Load impedance : Equivalent to joad impedance
109
of tape recorder output con-
nected to TAPE IN
Nominal outputlevel :-10 dB (0.3V}
BUSS INPUT
Input impedance.
Nominal input. jevel
Maximum input level
: Greater than 20k ohms
:-10 dB {0.3V)
:+18dB (8V}
DIRECT OUTPUT
Load impedance : Greater than 10k ohms
Nominal output level :-10dB (0.3)
Maximum output level :+48dB (8V)
ACCESS SEND and RECEIVE
Access send level -10dB (0.3V)
Maximum send level =: +18dB (8V)
Load impedance : Greater than 10k ohms
Access receive level :-10dB (0.3V)
Maximum receive level:
Input +18 dB (8V), Buss Master +30 dB (30 V)
Input impedance :
Input <50k ohms , Buss Master <10k ohms
TALKBACK OUTPUT
Load impedance :8 ohms
Maximum output level : 1W
HEADPHONE OUTPUT
Load impedance :8 ohms
Maximum output level :100mW.
LINE 1, 2,3 MON.
Input level :-10 dB {0.3V)
Maxirnum input level :+18dB (8V)
Input impedance : Greater than 100k ohms
FREQUENCY RESPONSE
Pam buss 1:20 Hz~ 20 kHz, #1dB
Aux buss 220 Hz ~ 20 kHz, +1 dB
Mon buss. :20 Hz ~ 20 kHz, +1dB
Headphone 50 Hz ~ 15 kHz, #208
EQUIVALENT
INPUT NOISE 126 dB weighted
123dB unweighted
(20 Hz ~ 20k Hz}
SIGNAL to NOISE,
OVERALL (at nominal input levels)
One mic input — 76 dB weighted, 73 dB unweighted
16 mic inputs— 65 dB weighted, 62 dB unweighted
24 mic inputs— 63 dB weighted, 60 dB unweighted
One tine input — 76 dB weighted, 73 dB unweighted
16 line inputs— 72 dB weighted, 69 dB unweighted
24 line inputs — 70 dB weighted, 67 dB unweighted
EQUALIZATION (Peak and dip type, 15d8 continuous}
Hi band FOkKHzZ