Advanced Features
PIP/PBP/POP
Press the PIP/PBP button once to display activate picture-in-picture (PIP).
Press twice to activate picture-by-picture (PBP).
Press three times to activate picture-on-picture (POP). Then, the POP screens will display the TV
Channel programs on by one.
NOTE: The OSD menu is not available in PIP/POP/PBP modes.
TV
AV
COMPONENT
PIP
Chapter 1
PC
Swap
PIP (Picture-in-Picture)
PBP (Picture-by-Picture)
1a. Press the ACTIVE key to toggle between PIP screens.
1b. Press the TV, AV, COMPONENT or PC keys, number keys or
CH up or down to change the content of the active screen.
2. Press the SWAP key to change the content between the
primary and the subscreen.
3. Press the POSITION key to select the location of the
subscreens, from upper left -> upper right -> lower right ->
lower left, as shown in the image.
4. Press the SIZE/MODE key to select the size of the subscreen,
from 25% -> 37.5% -> 50%, as shown in the image.
POP (Picture-on-Picture)
31