Table of Contents
Advertisement
4.
Scan for analog channels.
5.
Setup is now complete. You are ready to begin watching TV.
If you leave the setup process before it is complete, you will be given a choice of options:
1. Resume setup
2. Resume setup wizard at next startup
3. Exit and do not remind me
Select an option and press OK to exit.
No.
1
Power
a. Turn on the power switch beneath the screen.
b. Press the power button, number keys or channel up / down button on the
remote control.
2
Setup Wizard
The first time you switch on the TV, the Setup Wizard will guide you to
complete the language selection and channel scanning.
Press OK key to begin the setup process.
3
Changing channels
a. Press 0-9 on the remote control to select a channel. The channel changes
after 2 seconds. Press ENTER to select the select the channel immediately.
b. Pressing the channel (CH) up/ down button on the remote control will also
change the channel.
4
Adjusting the volume
Adjust the volume level using the (VOL) +/- button on the remote control.
Chapter 1
Description
17
Advertisement
Table of Contents
