Roland alpha JUNO-2 Owner's Manual page 22

co DCO PWM Rate
Example V
This parameter works only on the Pulse Wave 03
and Sawtooth Wave 03. The rate of the LFO mod-
ulation that changes the pulse width of the
om waveform can be set. 0 to 127 are the values valid
for this parameter. At 0, however, the pulse width
is not modulated by the LFO but set at the PW/
PWM Depth. When this parameter is set to the
value other than 0, the pulse width set with the
DCO PW/PWM Depth is the widest pulse made by
L the LFO modulation.
HPF (High Pass Filter)
QO HPF Cutoff Frequency
Example V
This parameter changes the cutoff point of the
HPF.
Cutoff Point Frequency
Display ® Function
The lower frequencies are emphasized, 7 a
(This is useful for fat bass sound.)
Frequency
HPF is off.
Frequency
Cutoff point is set at lower frequency. Feast paint
Level Frequency
Cutoff point is set at higher than 02.
The produced sound is harder and thinner | Ieutott Point
than that of 02. Frequency
22