Table of Contents
Advertisement
CPU Configuration
AVX2 Ratio Offset
AVX Ratio Offset specifies a negative offset from the CPU Ratio for AVX workloads.
AVX is a more stressful workload that lower the AVX ratio to ensure maximum
possible ratio for SSE workloads.
CPU PLL Spread Spectrum
Enable Spread Spectrum to reduce electromagnetic interference for passing EMI
tests. Disable to achieve higher clock speeds when overclocking.
PCIE/DMI Spread Spectrum
Enable Spread Spectrum to reduce electromagnetic interference for passing EMI
tests. Disable to achieve higher clock speeds when overclocking.
BCLK Advanced Setting
Configure BCLK advanced settings.
BCLK Aware Adaptive Voltage
BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
FCLK Frequency
Configure the FCLK Frequency.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
74
Advertisement
Table of Contents
