Troubleshooting - NewAir Beers of the World Owner's Manual

Custom designed beer fridge
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

Problem
The beverage fridge
does not cool.
The beverage fridge
is not cold enough.
The beverage fridge
seems to make too
much noise.
An interior red light
is flashing.
Frost is building up
in the unit.
www.newair.com
Possible Causes
The unit may be plugged
into a wall unit using a
different voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external environment
may require a higher
setting.
The fridge may be placed
too close to a heat
source.
There is insufficient
ventilation.
The door is not
completely closed or the
door seal is not working
properly.
The unit is not level.
There is insufficient
ventilation. The unit is
too close to a wall or
another surface.
The temperature is set
too low.
There is excess humidity
or the interior
temperature is too low.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
and check for a broken
fuse.
Lower the temperature of
the fridge.
Keep the fridge away from
direct sunlight and other
heat sources.
Place the beverage fridge
in an area with proper
ventilation and clearances.
Close the door tightly. Do
not open the door
frequently, and do not
keep the door open for
extended periods of time.
Replace the seal on the
door if necessary.
Adjust the unit's feet and
ensure the product is level.
Allow sufficient clearance
around the unit.
Adjust the temperature so
that it is higher than the
beverage fridge's interior
temperature.
Turn off the beverage
fridge, unplug it, and
remove the frost buildup
manually. Reconnect the
power once the ice has
thawed.
EN
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ab-1200bc1

Table of Contents