Table of Contents
Advertisement
Safety Information
∙ Do not insert or remove the riser cable while the computer is running.
∙ Handle the riser cable with care to avoid twisting or damaging the cable.
∙ Ensure a secure connection of the riser cable and prevent any short circuits.
∙ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing.
∙ Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
∙ Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
∙ Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
∙ It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the riser cable to prevent electrostatic damage. If an ESD wrist strap is not
available, discharge yourself of static electricity by touching another metal object
before handling the riser cable.
3
Advertisement
Table of Contents
