Advertisement
(©) LOUDNESS button**e
Press this button when the volume is low to raise the low
and high range levels so that the sound can be heard more
easily. This button operates in stereo mode only.
©) DYNAMIC RANGE CONTROL button
This equalizes the sound to let you hear subtle sounds even
when listening at low volume levels. You can only use this
function during DOLBY DIGITAL operation.
@ TAPE 2 MONITOR button
(8) HOME THX CINEMA button
(@) DSP MODE button'*°=
40 SYSTEM SET UP button
d) PHONES jack (Headphone terminal)
During Dolby Digital operation, remember that LFE channel
sound from the sub woofer is still output even if you connect
the headphone plug.
Display
VSA-E06
(2 Video input terminals
Connect to a video camera, etc.
43 SPEAKERS A, B buttons
ON/OFF switches for the A and B speaker systems.
BASS (-, +) buttons*"°=
Use to adjust tone. These buttons operate in stereo mode only.
a5 TREBLE (-, +) buttons*"°T
Use to adjust tone. These buttons operate in stereo mode only.
46 0] button
ad STEREO button
48 LIST IN button
49 Select/Adjust buttons
* NOTE:
These operation buttons do not function during AC-3 input.
©)
—
|
PROGRAM
FORIAAT
DISPLAY
@) PROGRAM FORMAT display
When playing back in the Dolby Digital (AC-3) mode, the
indicator of the channels set for the playback source lights.
(2) SIGNAL SELECT indicators
The input signal format currently selected will light.
(@) DOLBY DIGITAL and PRO LOGIC indicators
"DOLBY" lights when the Dolby Surround mode is ON. There
are two Dolby Surround modes - Dolby Digital (AC-3) and
Dolby Pro Logic. "DOLBY" and "DIGITAL" light during Dolby
Digital, and "DOLBY" and "PRO LOGIC" light when played
back in Dolby Pro Logic.
@ HOME THX CINEMA mode indicators
Light when HOME THX CINEMA mode is selected.
() SYSTEM SET UP indicator
Lights when SYSTEM SET UP mode is selected.
6) DSP MODE indicators
Light when DSP MODE is selected.
HOME THX CINEMA > [ON OFF
Deb MODE
Bet lee
DIGITAL PRO LOGIC_]|L
SET UP
Up. ON
NCE
DA
L
THEATER-12
TONE CONT.
OVERLOAD
@ STEREO indicators
Light when STEREO mode is selected.
(8) ATT indicator
Lights when INPUT ATT is ON.
@) LFE indicator
LFE}
lights when the LFE (Low Frequency Effects) channel
is set for the playback source with Dolby Digital. The LFE
indicator also lights when LFE signals are input.
(0 Speakers A, B, H.P indicators
The indicator of the speaker system (A, B) selected will light.
"H.P" lights when using a headphone.
When you use headphones, both SPEAKERS A and B will
switch OFF.
@ TAPE 2 indicator
Lights when TAPE 2 MONITOR
is ON.
@® CHARACTER display
43 OVERLOAD indicator
This lights when analog signal input level is excessive.
When it flashes, switch ATT ON using the remote control to
reduce the strength of the input signal.
97
Advertisement
