Advertisement
VSA-E06
Remote control unit
2 ©
MULTI
CONTROL
LD/SAT
cD
DVD
VCR 14
VCR 2
STEREO DSPMODE
OO
THXCINEMA)
CHSELECT TESTTONE
ATT — SIG.SELECT|
— CHLEVEL +
BO wes)
~~
_|_eliss__
iver
So
FUNCTION [45] MODE CHECK
()
MULTI
[COMMANDER]
| OPERATION SYSTEM OFF
seu
|
5)
on
-
oy
Q PIONEER
MULTI CONTROL COMMANDER
PRE-PROGRAMMED
AND LEARNING
© AMP (Amplifier) POWER button
(2) MUTING button
Press to mute the volume.
A, V, <1, >, ENTER (Select/Adjust) buttons.
[When set to other than AMP (OPERATIONS)]
il, O operate as FO + (Frequency up) and FO - (Frequency
down) buttons in TUNER function.
() [TV, VCR Operations]
Selects the TV broadcast channel.
[CD, LD, DVD operations]
i, >t>1 (Chapter/Track Search) buttons.
[TUNER operations]
Station up/down buttons.
©) MULTI CONTROL function buttons
Use to set and operate the MULTI CONTROL buttons, and
switch the function.
TV CONTROL: Press to operate TV.
@ Number/Amplifier setting buttons
[When setting AMP (operations)]
STEREO:
Switches the STEREO mode.
DSP MODE:
Switches the DSP surround effects. The DSP
MODE
does not function while a Dolby Digital (AC-3)
program source is being played back.
C] : Switches the Dolby Surround mode.
THX CINEMA:
Switches the THX mode.
CH. SELECT:
Selects the speaker that you want to adjust.
TEST TONE:
When turned ON (while in SYSTEM SET UP
mode), volume balance adjustment signals are output in turn
from each of the speakers and can be adjusted.
ATT:
Operates at ANALOG
signal input. When turned ON
when the sound is unstable due to excessive input levels,
the input signal level drops so that the sound becomes easier
to listen to.
SIG. SELECT: Selects an input signal in the LD, DVD function.
CH. LEVEL: Adjusts the volume level of the speaker selected
with the CH. SELECT.
LIST IN: Enters the LIST input menu in the CD function.
SYS. SET UP: Enters the SYSTEM SET UP mode.
[TUNER operations]
Number buttons: Use for setting the frequency value when
the station call is selected or during direct access.
CLASS:
Switches the CLASS number.
[VCR operations]
TV/VCR:
Switches between TV and VCR.
[CD Operations]
DISC: Use to select a DISC number.
@® LIST button
Displays the LIST menu when CD is selected with the INPUT
SELECTOR.
@) FUNCTION button
Switches the function.
d MULTI OPERATION button
Use to set the multi operation.
ad) POWER button
Turns ON/OFF the power of products other than this unit.
d2 TV buttons
43 AMP button
Press when using this button in amplifier setting mode.
MODE CHECK button
ds) COMMANDER SET UP button
Use to control and learn operations of other manufacturers'
products, and set multi operation functions.
Advertisement
