Alarm Clock; Infrared - Philips 362 Manual

Press R
to access the list of all recordings.
Back
When you select a sound file, it is played
automatically in a loop. Press
options. You can
Play recording,
Set as ringer, As SMS/MMS ringer
can also send it by Email, IrDA or MMS.
A flashing warning sign indicates that your recording
will soon reach the maximum authorized length. If
you do not stop recording, a red envelope icon informs
you that your recording is too long to be sent via MMS.

Alarm clock

Your mobile phone has a built-in alarm clock
with a snooze feature. You can set up to three
separate alarms and choose whether or not
the alarm should repeat. To set an alarm, follow the
steps below:
1. Select an alarm and set it On.
2. Then enter the time and press OK.
3. Then select the frequency:
weekdays.
4. Finally, select the type of alarm: the
melody from the sounds album and press OK.
Repeat above steps to set other alarms.
14
to access the
OK
or it,
Rename Delete
or As reminder. You
Once, Every day, On
or a
Buzzer
The alarm clock will ring even if your mobile phone is
switched off and/or the ringer volume is set to Silent.
When the alarm rings, press any key to stop it (except
if the snooze mode is on, see below).
Snooze mode
This menu allows you to set the snooze mode
Off. When the alarm rings and the snooze mode is On:
press any key (except R Stop) to stop the ring-
•
ing temporarily. The alarm will ring again
around 7 minutes later.
press R
• to stop the ringing and the alarm
Stop
repetition.
The snooze mode is automatically deactivated after 9
alarm repetitions.
The snooze mode setting applies to all the alarms you
have set.

Infrared

Your mobile phone has an infrared port that
allows you to send or receive data to or from
other infrared-compliant
another mobile phone, a computer, a PDA, etc.)
through a wireless link.
On or
devices (e.g.
Business