Koolaire STH045 8/15 Technician's Handbook page 37

Step 9 Mix a solution of sanitizer and warm water.
Solution Type
Sanitizer
Step 10 Use half of the sanitizer/water solution to
sanitize all removed components. Use a spray bottle
to liberally apply the solution to all surfaces of the
removed parts or soak the removed parts in the
sanitizer/water solution. Do not rinse parts after
sanitizing.
Step 11 Use half of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and
bin. Use a spray bottle to liberally apply the solution.
When sanitizing, pay particular attention to the
following areas:
• Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 12 Replace all removed components.
Step 13 Wait 25 minutes.
Step 14 Reapply power and water to the ice machine
and place the toggle switch in the ice position.
Step 15 Water will flow through the water dump valve
and down the drain. Wait until the water trough refills,
then add the proper amount of ice machine sanitizer to
the water trough.
Model
K0250 K0350 K0420
K0500 K0600 K1000
K1350
Wait until the sanitize cycle is complete (approximately
24 minutes) then place the toggle switch in the ice
position to start ice making.
Part Number STH045 8/15
Water
3 gal. (12 l)
Mixed With
2 oz (60 ml) sanitizer
Amount of Sanitizer
3 ounces (90 ml)
6 ounces (180 ml)
37