Toshiba MMD-UP0481HFP-UL Service Manual page 49

<RBC-AWSU52-UL>
[Procedure]
The position of indoor unit body by address
1
Push the [ MENU] button to display
the menu screen.
2
Push and hold the [
and the [ ] button at the same time
to display the "Field setting menu".
→ Push and hold the buttons for more than 4
seconds.
3
Push the [ ] / [
select "7. DN setting" on the "Field setting
menu" screen, then push the "[
4
Push the unit to confirm the address
of indoor unit.
→ The selected unit changes as follows each
time the button is pushed:
1-1 1-2
5
Push the [
Set/Fix]
→ The setting display for the selected unit
appears.
→ When the group control is used, the fan and
louver of the selected indoor unit operate.
6
Push the [ MENU] button to set the
other Code(DN) and Data. After
"Continue?" is displayed on the screen,
push the [ Return ] to finish the setting
operation. " Setting" appears on the
screen for a while, then the screen returns
to the "Field setting menu" screen.
MENU] button
] button to
] Set"
3-3
- 49 -