Philips MAGNAVOX CCX253AT Owner's Manual page 6

6 Hooking Uf> the TV/VCR
I
Hook up your TV/VCR using one of the connections shown.
A.
Hooking Up Your TV/VCR
With a Cable Signal or
Outdoor Antenna
Connect a Cable sl^al
or an antenna to the
ANT (enna) Jaclc
B.
Hooking UpYourTVAfCR
With a Cable Box
To view any channel, set theTY/VCR
to the Cable Box output channel
(channel 03 or 04).Then, select chan¬
nels at the Cable Box.
Connect the Cable signal to
the IN Jack on the Cable Box.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.
c.
Hooking Up Your TV/VCR
With an indoor Antenna
To install a rod antenna (not sup¬
plied), push the stem of the antenna
into the antenna hole on the top of
the TV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of the TV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.
■
Rod Antenna
(not supplied)