Philips MAGNAVOX CCX253AT Owner's Manual page 15

Setting the Qock (cont'd) 15
Press the Number I button to select SET PBS CH.
AUTO.
NOW SEARCHING flashes on the TV/VCR screen.
(However, you may see the message "PLEASE TURN OFF TO SET
AUTO CLOCK PLEASE WAIT SEVERAL MINUTES" If this mes-
sage appears, turn off the TV/VCR for a few minutes. When you
turn on the TV/VCR, the time will be set.
If the time is not set, repeat steps 1-5. Or, follow the steps on
pages 12 - 13 to set the clock manually or pages 16 - 17 to set the
clock with Manual PBS Channel Selection.)
7
When the TV/VCR finds the PBS channel, the time will
appear on-screen. Press the STATUS/EXIT button.
AUTO CLOCK \
TIME 06:30 PM
DATE 07/01/97
TUESDAY
'^TO END PRESS EXIT ^
m
If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen, you will be prompted to turn off the
TV/VCR.Turn off the TV/VCR.
Leave it off for several min¬
utes. When you turn on the TV/VCR again, the clock will be set.
6
Wait for theTVA/^CR to find
the time.
Helpful Hints
To display the time, press the STA¬
TUS/EXIT button. A status display,
which includes the time, will appear
on the TV/VCR screen. Deta/fe are
on page 26.
If you press the S7ATUS/EX/T but¬
ton while you are setting the clock,
the screen will exit Set Clock mode
and return to the program you were
watching. If this happens, start over.
You must turn off the TV/VCR for
several minutes during automatic
clock setting. If the clock is not set
when you turn on the TV/VCR,
repeot the steps for Automatic PBS
Channel Selection, if the clock still is
not set, set the clock manually.
You cannot use the AUTO CLOCK
feature if you don't receive a PBS
channel that carries a time signal in
your area. Set the clock manually.