Philips MAGNAVOX CCX253AT Owner's Manual page 33

« • •
Timer Recording (cont*d) 33
4
Use the Number buttons (I - 8) to select a position in
which to store the timer recording. Flashing numbers indi¬
cate an open position (one in which a timer recording has not yet
been stored).
NOTE* If you select a number that has already been used to store a
timer recording, PREVIOUSLY SET PROGRAM will appear on-screen for a
few seconds. Then information about the program in that position will
appear on-screen. If this happens, press the STATUS/EXIT button.Then
use the Number buttons to select another position.
5
« Enter the channel of the TV program you want to record (you
must enter a 0 before all single digit channels).
• If you are recording from line input, press 0,0. A/V IN will
appear on-screen.
« If you are recording using a Cable Box,enter the Cable Box out¬
put channel (03 or 04). Be sure to select the channel at the
Cable Box and leave the Cable Box on for the timer recording.
6
Press two Number buttons for the hour(s) you want the
recording to begin. Press two Number buttons for the
minute(s) you want the recording to begin. Press I for AM
or 2 for PM. For example, for 9:30 PM, press 09,30,2.
CHANNH. 10
TIME ON 0930 PM
TIME OFF —:—
TO CORRECT PRESS CLEAR
TO END PRESS EXIT