Rerecording (Tape Duplication) 31 - Philips MAGNAVOX CCX253AT Owner's Manual

Rerecording (Tape Duplication) 31
1
Make the connections of D. on page seven, using audio and
video cables.
2
The source unit (VCR or camcorder) will play your tape.
Insert a
prerecorded tape in the source unit.
If playback begins, press
the STOP button on die unit.
3
The TV/VCR will record your tape.
Insert a blank tape in the
TV/VCR,
Make sure the tape's record tab Is intact.The TV/VCR
will turn on automatically.
4
Point the remote control at the TV/VCR. Press Number
buttons 0,0 so that ATV IN appears on-screen.
5
Point the remote control at the TV/VCR. Press the (Tape)
SPEED button until the desired tape speed (SP, 1_P, or
SLP) appears on-screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/T button on the remote
control or the STOP/EJECT button on the TV/VCR, then
stop the tape on the source unit (VCR or camcorder).
1
2
3
Make the connertions of D.
on page seven.
Insert a prerecorded tape in
the source unit.
Insert a blank tape in the
TV/VCR.
Helpful Hints
• Unauthorized recording of copy¬
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment may
operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Audio and video cables are not
included.