Advertisement
•
Location
of Controls
Ia"6T_ ",_'_ I
POWER
Press -_ On.
Press again -_ Off.
SENSOR AREA FOR
REMOTECONTROL
MENU
Press _ Accesses
MAIN MENU.
Pressagain
_ ExitsMAIN
MENU.
VOLUME
UP/DOWN
(+) Increases sound.
(-) Decreases
sound.
(V)
Selects next lower
channel.
• Press both at the same
time to access the MAIN
MENU screen.
POWER
Press -_ On.
Press again -_ Off.
REMOTE
KEYPAD
Accesses
any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL
PREFERENCE
--
With the Personal Preference
buttons,
you
can
program
your
favorite
programs
by using the 4 categories
A,
B, C and D. The channels
can
be
accessed
quickly
by using
these
buttons. (See page 32.)
VOLUME
UP/DOWN
(+) Increases sound.
(-) Decreases
sound.
• In menu mode, changes
or selects
the TV adjustments.
MENU
Press -_ Accesses
MAIN MENU.
Press again -_ Exits MAIN MENU.
CATV/DVD-TV/VCR
MODE --
SELECT
SWITCH
In TV/VCR position, sends power and
channel
select
commands
(Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD
position,
sends power
and channel
select
commands
to a
cable TV converter and DVD control.
DVD/VCR
CONTROL
See page 40.
Infrared Transmitter
Window
DISPLAY
Press -_ Displays receiving channel for
four seconds.
Press again -_ Removes display.
• Temporarily
displays
receiving
channel
when
in Closed
Caption
mode.
INPUT
Press
-_ Switch
to external
video
INPUT 1 mode.
Press 2 times -_ Switch to external video
INPUT 2 mode.
Press 3 times -_ Switch to external video
INPUT 3 mode or COMPONENT
mode.
Press 4 times -_ Switch
back to the
original TV mode.
See page 38.
ENTER
Used in some instances where a Cable
Converter
Box requires
an "enter"
command
after selecting
channels,
when
using the REMOTE
KEYPAD
button. (See page 39)
CHANNEL
UP/DOWN
(A) Selects next higher channel.
(V) Selects next lower channel.
• See
pages
28 ~ 30 for channel
presetting.
• Moves the "O" mark of the MENU
screens.
MUTE
Press -_ Mutes sound.
Press again --_ Restores sound.
• CLOSED
CAPTION
appears
when
sound is muted.
• The above shaded
buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the
remote control, place it under a fluorescent
light or other lighting.
• The phosphorescent
material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination
will vary depending
on the strength of lighting used.
• The degree of illumination
will decrease
with time and depending
on the temperature.
• The time needed to charge the phosphorescent
display will vary depending on the surrounding
lighting.
• Sunlight and fluorescent
lighting are the most effective when charging the display.
7
Advertisement
