Advertisement
Universal Remote Control
With the purchase of your television set you
also have received
the latest innovation
in
remote control technology. With its easy-to-use
push button
keyboard,
your
Remote
can
control your television set and most infrared
remote controlled VCRs, cable TV converters
and DVDs as well.
• Depending on the model year produced, brand
and type of VCR, cable TV converter and DVD,
some models may not be compatible with the
remote control.
• Some
brands
may
not enable
channel
selection until the ENTER is pressed. In such
case, try the following.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD "2".
(2) Press REMOTE KEYPAD "4".
(3) Press ENTER.
For detailed
information
on the use of the
Cable TV converter Box refer to their operating
manuals.
•
Using your Remotewith
yourTV
After installing
the batteries,
set the CATV/
DVD-TV/VCR
on the Remote
to the TV
position. (If you can change the channel of the
TV by pressing
CH A/V
on the Remote
Control, it is in the TV position.)
DVD/VCR POWER
Press to turn the VCR or DVD
on and off.
PLAY
It,
Press to playback
a tape or disc.
REWIND
<_1
Press to rewind a tape or
reverse a disc. For some VCRs
or DVDs you may need to press
STOP first, then REWIND.
PAUSE
n
Press to temporarily
stop the
tape or disc during playback
or recording (VCR only).
Press again to release PAUSI
STOP •
Press to stop the tape or disc.
40
"Identifying"
VCRs, cable TV converters
and DVDs
Your Remote
Control
has been set at the
factory to operate your TV and many remote
controlled
VCRs, cable TV converters
and
DVDs. However, in some cases an easy one-
time set-up step may be necessary before the
Remote will operate accessory VCRs, cable
TV converters and DVDs.
In this set-up step, the Remote
locates and
memorizes the remote control transmitter code
for the VCR, cable TV converters and DVDs.
Once "identified", the Remote
sends proper
signals to operate your accessory.
This
identifying
step will not have to be
repeated
until
power
to the Remote
is
interrupted due to a battery failure.
Using your remote control with a VCR
Once you make certain the Remote Control
has "identified" your remote controlled VCR or
DVD, the Remote is ready to operate your unit.
The various VCR or DVD function buttons on
the Remote will not operate yourVCR
or DVD
if those features are not already found on your
unit.
All VCR buttons
will operate
whether
the
Remote is in TV orVCR
modes.
For detailed information on the use of the VCR
or DVD, refer to the operation manual of the
VCR or DVD.
Use to enter two-digit code
numbers when identifying
your
VCR, DVD and CATV converter.
Press to rapidly advance the
tape or disc. For some VCRs or
DVDs, you may need to press
STOP first, then FR
CHANNEL
UP (A)/DOWN
(y)
Press to scan up or down through
channels on the VCR.
DVD SKIP
Press to jump forward to the
beginning
of the next chapter/track,
or backward
to the beginning
of the
current chapter/track,
and
automatically
start to play that
chapter/track.
RECORD
•
Press to begin recording.
(VCR only)
Advertisement
