Table of Contents
Advertisement
Exampte 1
Change the input source for the amplifier to CD and play the 3rd track
on a CD in the CD player.
Turn the main amplifier ON
Change the amplifier's input source to
LD
Set the Surround mode to DOLBY
Switch the TV to video
input
Set the laser disc player to PLAY
1.
Use a ballpoint pen or other sharp point to press the MACRO
button m, then press the CD
Function
button
(S. CD-M
is
displayed on the LCD,
When you are finished programming the macro, use a ballpoint
pen or other sharp point to press the
MACRO
button
H).
Now, execute the macro you Just programmed.
1
.
Press the
CD Function
button d] for 3 seconds.
2.
The macro commands are transmitted to the components in
order, and the names of the operations being performed are
displayed on the LCD in order.
1
.
2.
3.
4.
Use a ballpoint pen or other sharp point to press
button H].
the
MACRO
• Here the
LD Function
button [S is used as the macro button,
but any function button can in fact be used.
To set the various steps of the macro, press the following buttons
in order;
POWER ON
[J],
LD
m.
AMP*
S.
2
(DOLBY)
m.
TV*
0,
VIDEO
{use
Jog Dial
[U to select VIDEO and press
ENT
button
13)
. LD*
0. ► S3,
Vt/hen you are finished programming the macro, use a ballpoint
pen or other sharp point to press the
MACRO
button 0. The
remote controlier returns to normal mode.
Now, execute the macro you just programmed.
1.
Press the
LD Function
button 0 for 3 seconds.
The macro commands are transmitted in order, and the names of
the operations being performed are displayed on LCD © in
order.
• When executing this macro, function operations AMP', TV*,
and LD* only switch the command set of the remote controller
and no signal is transmitted to the component.
• To cancel the transmission of a programmed macro, use the
Cursor buttons 03 to press
a.
CLEARING MACRO PROGRAMS
The following procedure is used to erase macros you have
programmed into the remote controller's memory.
1.
Press and hold the
CLEAR
button 01, then the button for the
function 0 to be cleared (in this case LD) for 3 seconds,
LDCL?
will appear on LCD
If you wish to continue the clearing
operation, press the OK Cursor button 03.
• To cancel the memory clearing operation, do not press OK
Cursor button 03 and simply touch any other button.
25
Advertisement
Table of Contents
